Brother ScanNCut DX · SDX125 / SDX225 / SDX325 · CanvasWorkspace

Brother ScanNCut Rhinestone Template SVG & Auto Blade Setup

Create clean rhinestone SVG cut files calibrated for 96 DPI SVG coordinate scaling in Brother CanvasWorkspace—without buying Brother's paid Rhinestone Starter Kit activation card. Preconfigured for a 296 mm max width on 12x12 standard tack mat and Half-Cut sticky flock weeding.

CanvasWorkspace FCM Circle-Count & Flock Border Planner

Estimate approximate circle count and total sticky flock sheet width (including a brushing margin) before sending your job to Brother CanvasWorkspace.

Estimated FCM Circle Objects
~498 circles (Web & Desktop safe)
Flock Cut Sheet w/ 12 mm Brush Rim
254 × 184 mm (Fits 296 mm 12×12 mat)
Load ScanNCut Preset in Maker

Brother ScanNCut DX vs CM Series Sticky Flock Settings

Parameter ScanNCut DX (SDX85 / 125 / 225 / 325) ScanNCut CM Series (CM350 / CM650W) Why It Matters on Rhinestone Flock
Blade sensor system DX Auto Blade thickness sensor on sticky flock Manual numbered blade holder (start ~3.5–4.5) Prevents slicing through the slick paper carrier
Half-Cut mode ON (test Half-Cut pressure -2 to +1) Not automatic — calibrate manual blade depth Lets all waste dots pull out in one clean sheet
SVG import scaling 96 DPI SVG coordinate scaling (mm viewBox) 96 DPI SVG coordinate scaling via CanvasWorkspace Preserves exact 3.1 mm (SS10) or 4.3 mm (SS16) holes
12×12 mat usable width 296 mm max width on 12x12 standard tack mat 296 mm × 296 mm usable cutting zone Leaves space for 10–12 mm outer flock dam
Recommended bold preset 4.3 mm hole for SS16 (4.0 mm stone), 1.0 mm gap 4.3 mm hole for SS16 (4.0 mm stone), 1.0 mm gap Keeps circle count fast in CanvasWorkspace
Fine-detail preset 3.1 mm hole for SS10 (2.8 mm stone), 0.9 mm gap 3.1 mm hole for SS10 (2.8 mm stone), 0.9 mm gap Use desktop CanvasWorkspace for >900 circles

Clean One-Pull Weeding on ScanNCut Mats

Sticky rhinestone flock has an aggressive repositionable adhesive designed to anchor templates onto a baking tray or work board. If you stick raw flock directly onto a brand-new Brother Standard Tack Purple Mat, lifting the liner can curl the flock. Instead, leave the flock on its factory paper liner, brayer the liner firmly onto the ScanNCut mat, and let Half-Cut kiss-cut only the upper velvet layer. When you peel the velvet flock off the liner at a sharp 45-degree angle, 95% of the punched circles stay behind on the liner automatically.

Compare stone sizes before ordering crystals on our rhinestone millimeter reference chart, or test arched team names on the custom word lettering tool.

Brother ScanNCut Rhinestone FAQ

Why does Brother CanvasWorkspace warn when a rhinestone SVG has too many shapes?

Web-based CanvasWorkspace caps single-file object counts lower than the desktop edition and slows down when thousands of tiny circles are ungrouped. Keep finished width reasonable or choose larger SS16 (4.0 mm) stones for full-front hoodies so total circle count stays well inside ScanNCut FCM transfer limits.

Does the Brother ScanNCut DX Auto Blade cut through the sticky flock backing paper?

ScanNCut DX models probe material thickness automatically on every job. Enable Half-Cut in the machine settings menu and dial Half-Cut Pressure between -2 and +1 on a 5-hole test strip so the blade slices cleanly through the velvet flock layer while leaving the slick release liner intact for one-pull weeding.

How does 96 DPI SVG coordinate scaling affect CanvasWorkspace imports?

Brother CanvasWorkspace interprets SVG root width/height attributes using 96 DPI SVG coordinate scaling when millimeter units are omitted. Our generator writes explicit millimeter dimensions and matching viewBox units so a 230 mm template imports at 230.0 mm in both PC/Mac CanvasWorkspace and USB direct-read workflows.

What is the maximum rhinestone template width on a standard 12x12 Brother ScanNCut mat?

Brother's CADXMATSTD12 standard tack mat allows a 296 mm max width on 12x12 standard tack mat (about 11.65 inches). Leave at least a 10 mm flock border around your outer stone row so your rhinestone brush has a flat rim to sweep excess crystals away.